MAX9174EUB+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9174 |
| Output | LVDS |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 x 1:2 |
| Current - Supply | 25mA |
| Propagation Delay (tpd) | 3.23 ns |
| Data Rate (Max) | 800Mbps |
| Same Edge Skew-Max (tskwd) | 0.045 ns |
| Delay Time | 2.39ns |
| Input Conditioning | DIFFERENTIAL |
| Capacitance - Input | 4.5pF |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9174EUB+T Overview
There is a package of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) for easy transportation of this power buffer.Packaged in Tape & Reel (TR) and ready for power buffer.Adaptable universalism in a single mout.The type Buffer, Multiplexer is typical.3V~3.6V voltage is used to power this op amp buffer.In order for the output quality to be maintained, 1 x 1:2 channels must work together.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.To find pin-to-pin solutions for your specific needs, try searching with "MAX9174."It has 10 terminals.There is a peak reflow temperature for this alloy of 260 degrees Celsius.As the splitter is supplied by 3.3V voltage, it is capable of completing many demanding tasks in a short amount of time.The pinout of the power buffer starts from 10 pins it has.In the output, LVDS is used.There are 25mA op amp buffers in it.The repeter should not be fed with voltages higher than 3.6V.The splitter must have at least 3V to be able to start up.
MAX9174EUB+T Features
1 x 1:2 channels.
MAX9174EUB+T Applications
There are a lot of Maxim Integrated MAX9174EUB+T Signal Buffers, Repeaters, Splitters applications.
- Digital Cross-Connects
- Data or Clock Signal Amplification
- Medical
- Industrial/Embedded PC
- Industrial PCs
- Digital Crossconnects
- Communications Switchers
- Clock Distribution
- Protection Switching
- Portable IPC/HMI
