MAX917ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparators |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Output Type | TTL |
| Power Supplies | 2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation-Max | 571mW |
| Nominal Supply Current | 1.3μA |
| Max Supply Current | 1.3μA |
| Current - Output | 50mA |
| Propagation Delay | 95 μs |
| Quiescent Current | 1.6μA |
| Response Time | 95000 ns |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1nA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Hysteresis | 4 mV |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MAX917ESA+T Overview
In order to facilitate transportation, it is packaged in SOIC .This comparator is of the TTL output type.The comparator has 8 terminals.The electrical component in this case belongs to the Comparators families.A comparator supplied with 5V voltage can complete many demanding tasks.The device is equipped with 8 pins.This comparator has 8 pins.The comparator presents a quiescent current of 1.6μA volts.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 1.3μA in order to use the device normally.Current supply exceeding 1.3μA could cause disfunction of the compartator.The device can be run with 2/5V power supplies.Temperatures above 85°C are not recommended.A temperature lower than -40°C is unsuitable for the device.5.5V is the maximum supply voltage of the comparator.Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 1.8V .For the output to be of high quality, 1 channels must cooperate together.There is a high gain COMPARATOR amplifier at the heart of the comparator.A 50mA output current is specified for this device.
MAX917ESA+T Features
TTL output capability
Quiescent Current: 1.6μA
COMPARATOR amplifier
MAX917ESA+T Applications
There are a lot of Maxim Integrated MAX917ESA+T linear comparators applications.
- Security Detection Systems
- Portable Battery Monitoring
- Motor drives
- Notebooks and PDAs
- Set Top Boxes
- Hand-Held Electronics
- Window Comparators
- Wireless Base Stations
- Industrial
- Battery management and protection
