Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2004 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Max Power Dissipation |
571mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX917 |
Pin Count |
5 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
1 |
Nominal Supply Current |
1.3μA |
Output Current |
50mA |
Max Supply Current |
1.3μA |
Propagation Delay |
95 μs |
Quiescent Current |
1.6μA |
Response Time |
95000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.002μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1nA |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
1.6μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
80dB PSRR |
Height |
1.3mm |
Length |
3mm |
Width |
1.75mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX917EUK-T Overview
To facilitate transportation, it comes packaged in SC-74A, SOT-753 .There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .As you can see, the comparator has5 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical with Voltage Reference comparator.A total of 1 elements can be found in it.The board includes 5 pins.The recommended mounting method is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX917 .A quiescent current of 1.6μA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 1.3μA for normal use.A current supply greater than 1.3μA may cause the comparator to malfunction.Input current to the device cannot exceed 1nA .In this case, the part is from the Beyond-the-Rails? comparator series.
MAX917EUK-T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX917EUK-T Applications
There are a lot of Maxim Integrated MAX917EUK-T linear comparators applications.
- Zero-Crossing Detectors
- Appliances
- Battery-Powered Electronics
- General-Purpose Portable Devices
- System control and monitoring
- Window Comparators
- Ultra-Low Power Systems
- Portable and Battery-Powered Systems
- Wireless Base Stations
- Alarm and Monitoring Circuits