MAX918ESA+
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX918 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 1.3μA |
| Output Current | 50mA |
| Max Supply Current | 1.3μA |
| Propagation Delay | 120 μs |
| Quiescent Current | 1.6μA |
| Response Time | 120000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 2nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Propagation Delay (Max) | 120μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
MAX918ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.This comparator is of the Open-Drain, Rail-to-Rail output type.This chip is designed with the Tube package.There are8 terminals on the comparator.The component belongs to the Comparators family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical with Voltage Reference comparator.In total, it contains 1 elements.A total of 8 pins are included.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.8 pins are available on the comparator.Try search MAX918 to get more pin-to-pin solutions for your special needs.The comparator displays a quiescent current of 1.6μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 1.3μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.3μA .In order to run the device, there are only 2/5V power supplies required.Electronic comparator is possible to input a maximum of 1nA current into the device.Comparator electronics is a comparator part from the Beyond-the-Rails? series.
MAX918ESA+ Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX918ESA+ Applications
There are a lot of Maxim Integrated MAX918ESA+ linear comparators applications.
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Battery management and protection
- Threshold Detectors
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- Lithium ion battery monitoring
- Analog front end
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
