Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
471mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX918 |
Pin Count |
8 |
Output Type |
Open-Drain, Rail-to-Rail |
Number of Elements |
1 |
Power Supplies |
2/5V |
Nominal Supply Current |
1.3μA |
Output Current |
50mA |
Max Supply Current |
1.3μA |
Propagation Delay |
120 μs |
Quiescent Current |
1.6μA |
Response Time |
120000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.002μA |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
1nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
80dB PSRR |
Propagation Delay (Max) |
120μs |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX918ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.This comparator is of the Open-Drain, Rail-to-Rail output type.As a result, it is designed with Tape & Reel (TR) package.8 terminals are found on the comparator.The electrical component here belongs to the Comparators family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type with Voltage Reference .There are a total of 1 elements in it.Electronic comparator includes 8 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has 8 pins.Search MAX918 to find more pin-to-pin solutions.A quiescent current of 1.6μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 1.3μA when using the device.An excess of current supply over 1.3μA could result in malfunction of the comparator.The device can be powered by 2/5V power supplies.This part is from the Beyond-the-Rails? comparator series.
MAX918ESA+T Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX918ESA+T Applications
There are a lot of Maxim Integrated MAX918ESA+T linear comparators applications.
- Current and voltage sensing
- Ultra-Low Power Systems
- Window Comparators
- Consumer Medical Electronics
- Building automation
- Power Supervision
- Laptop Computers
- General-Purpose Portable Devices
- Notebooks and PDAs
- High-Speed Sampling Circuits