MAX918EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparators |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX918 |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 1.3μA |
| Output Current | 50mA |
| Max Supply Current | 1.3μA |
| Propagation Delay | 120 μs |
| Quiescent Current | 1.6μA |
| Response Time | 120000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1.6μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX918EUK+T Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .A comparator with an output type of Open-Drain, Rail-to-Rail is being used.As a result, it is designed with Tape & Reel (TR) package.The comparator has 5 terminals.Other Comparators like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.In total, it contains 1 elements.Electronic comparator has 5 pins.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.5 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX918 .There is a quiescent current of 1.6μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 1.3μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.3μA .There is a maximum current that can be input into the device of 1nA .This part is from the Beyond-the-Rails? comparator series.
MAX918EUK+T Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX918EUK+T Applications
There are a lot of Maxim Integrated MAX918EUK+T linear comparators applications.
- High-Speed Differential Line Receiver
- Body Control Modules
- Portable Battery Monitoring
- RC Timers
- General-Purpose Portable Devices
- Window Comparators
- Wide Range VCO; MOS Clock Timers
- Security Detection Systems
- Power Supervision
- Factory automation & control
