MAX919ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX919 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 800nA |
| Output Current | 50mA |
| Max Supply Current | 800nA |
| Propagation Delay | 940 μs |
| Quiescent Current | 1.2μA |
| Response Time | 95000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 2nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 940μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX919ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.Electronic comparator is shipped by Tube .8 terminals are found on the comparator.The chip belongs to Comparators .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Currently, it consists of only 1 elements.The board includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 8 pins.If you require more pin-to-pin solutions, search MAX919 for more options.There is 1.2μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 800nA .A supply current exceeding 800nA may result in the comparator malfunctioning.The device can be run with 2/5V power supplies.Electronic comparator is possible to input up to 1nA current into the device.In this case, the part is from the Beyond-the-Rails? comparator series.
MAX919ESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX919ESA+ Applications
There are a lot of Maxim Integrated MAX919ESA+ linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Battery-Powered Electronics
- High-Speed Sampling Circuits
- Consumer Medical Electronics
- Threshold Detectors
- Self-diagnostics
- Power Supervision
- Point of load regulators
- Infotainment and Clusters
