MAX919ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX919 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 800nA |
| Output Current | 50mA |
| Max Supply Current | 800nA |
| Propagation Delay | 940 μs |
| Quiescent Current | 1.2μA |
| Response Time | 95000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX919ESA+T Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.Ready for shipping in Tape & Reel (TR) package.There are8 terminals on the comparator.Electronic comparator is a component of the Comparators family.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator has a total of 1 elements.There are 8 pins on this board.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MAX919 .The comparator displays a quiescent current of 1.2μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 800nA .A supply current exceeding 800nA may result in the comparator malfunctioning.2/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 1nA current into the device.The part is from Beyond-the-Rails? comparator series.
MAX919ESA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX919ESA+T Applications
There are a lot of Maxim Integrated MAX919ESA+T linear comparators applications.
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Hand-Held Electronics
- Mobile Phones
- Security Detection Systems
- Industrial
- Building automation
- Lithium ion battery monitoring
- Set Top Boxes
- Limit Comparators
