MAX919EUK-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX919 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Circuits | 1 |
| Nominal Supply Current | 800nA |
| Output Current | 50mA |
| Max Supply Current | 800nA |
| Propagation Delay | 940 μs |
| Quiescent Current | 1.2μA |
| Response Time | 95000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 50mA |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX919EUK-T Overview
Electronic comparator is packaged in SC-74A, SOT-753 for convenient transportation.There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.Ready for shipping in Tape & Reel (TR) package.There are5 terminals on the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.The device is equipped with 5 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.This comparator has 5 pins.Try search MAX919 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 1.2μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 800nA .If the current supply exceeds 800nA , the comparator could malfunction.The maximal current your can input into the device is 1nA .The part is from Beyond-the-Rails? comparator series.
MAX919EUK-T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX919EUK-T Applications
There are a lot of Maxim Integrated MAX919EUK-T linear comparators applications.
- General Purpose Low Voltage Applications
- Mobile Phones and Tablets
- Laptop Computers
- Mobile Phones
- Battery management and protection
- Consumer Medical Electronics
- Metering Systems
- Analog front end
- High-Speed Sampling Circuits
- Infotainment & cluster
