MAX9201ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 696mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX9201 |
| Pin Count | 16 |
| Output Type | TTL |
| Power Supplies | +-5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 7mA |
| Max Supply Current | 7mA |
| Quiescent Current | 3mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~10.5V ±2.375V~5.75V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 7μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 7mA 5mA 3mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9201ESE+ Overview
To facilitate transportation, it comes packaged in 16-SOIC (0.154, 3.90mm Width) .A comparator with an output type of TTL is being used.This package has been designed with Tube .The comparator has 16 terminals.Electronic comparator is a part of Comparators family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical General Purpose comparator.As a result, it contains 16 pins.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 16 pins on the comparator.Try search MAX9201 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 3mA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 7mA in order to use the device normally.An excess of current supply over 7mA could result in malfunction of the comparator.A power supply of +-5V is sufficient for the operation of the device.You can input a maximum current of 5μA into this device.
MAX9201ESE+ Features
TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX9201ESE+ Applications
There are a lot of Maxim Integrated MAX9201ESE+ linear comparators applications.
- Notebooks and PDAs
- Alarm and Monitoring Circuits
- Self-diagnostics
- Limit Comparators
- Threshold Detectors
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers
- Battery-Powered Electronics
- Ultra-Low Power Systems
- General-Purpose, Low-Voltage Applications
