MAX9201ESE+T
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 696mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX9201 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | +-5V |
| Nominal Supply Current | 7mA |
| Max Supply Current | 7mA |
| Quiescent Current | 3mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~10.5V ±2.375V~5.75V |
| Output Current per Channel | 8mA |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 7mA 5mA 3mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
MAX9201ESE+T Overview
Electronic comparator is packaged in 16-SOIC (0.154, 3.90mm Width) for convenient transportation.This comparator is of the TTL output type.This package has been designed with Tape & Reel (TR) .The comparator has 16 terminals.Electronic comparator is a part of Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 4 elements.The pinout of the component starts from 16 pins it has.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .You can search MAX9201 if you are looking for more pin-to-pin solutions.A quiescent current of 3mA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 7mA .If the current supply exceeds 7mA , the comparator could malfunction.In order to run the device, there are only +-5V power supplies required.
MAX9201ESE+T Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX9201ESE+T Applications
There are a lot of Maxim Integrated MAX9201ESE+T linear comparators applications.
- High-Speed Differential Line Receiver
- Wearable Devices
- Mobile Phones
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Mobile Communications
- Infotainment & cluster
- Window Comparators
- Window Comparators, Multivibrators
- Set Top Boxes
