MAX9201EUE+
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 755mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9201 |
| Pin Count | 16 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | +-5V |
| Nominal Supply Current | 7mA |
| Max Supply Current | 7mA |
| Propagation Delay | 7 ns |
| Quiescent Current | 3mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~10.5V ±2.375V~5.75V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 7mA 5mA 3mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX9201EUE+ Overview
The product is packaged in 16-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.The comparator has a TTL output.This package has been designed with Tube .There are16 terminals on the comparator.The electrical component here belongs to the Comparators family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .A total of 4 elements can be found in it.Electronic comparator includes 16 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 16 pins.Alternatively, you may search for MAX9201 to find more pin-to-pin solutions for your specific needs.A quiescent current of 3mA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires 7mA supply current.The compartator could be damaged if the current supply exceeds 7mA .There is sufficient power to run the device from +-5V power supplies.The maximal current your can input into the device is 5μA .
MAX9201EUE+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX9201EUE+ Applications
There are a lot of Maxim Integrated MAX9201EUE+ linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Portable and Battery-Powered Systems
- General-Purpose, Low-Voltage Applications
- Handheld Instruments
- Notebooks and PDAs
- Battery-Powered Electronics
- Window Comparators, Multivibrators
- Power management
- Laptop Computers
- Point of load regulators
