MAX9201EUE+T
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 7mA 5mA 3mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 696mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9201 |
| Pin Count | 16 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | +-5V |
| Nominal Supply Current | 7mA |
| Max Supply Current | 7mA |
| Propagation Delay | 7 ns |
| Quiescent Current | 3mA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~10.5V ±2.375V~5.75V |
| Input Offset Voltage (Vos) | 4mV |
MAX9201EUE+T Overview
The product is packaged in 16-TSSOP (0.173, 4.40mm Width) to facilitate transportation.A comparator with a TTL output is used here.This package has been designed with Tape & Reel (TR) .Electronic comparator is possible to find the 16 terminals of the comparator.The component belongs to the Comparators family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In terms of type, this is a typical General Purpose comparator.This element consists of 4 elements in total.There are 16 pins on this board.The recommended mounting method is Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 16 pins on the comparator.If you require more pin-to-pin solutions, search MAX9201 for more options.As a result, this comparator displays a quiescent current of 3mA .The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 7mA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 7mA .Electronic comparator is sufficient to run the device wElectronic comparatorh +-5V power supplies.
MAX9201EUE+T Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX9201EUE+T Applications
There are a lot of Maxim Integrated MAX9201EUE+T linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- General-Purpose, Low-Voltage Applications
- Mobile Phones
- Window Comparators
- Point of load regulators
- Automotive
- RC Timers
- Industrial
- Portable and Battery-Powered Systems
- Factory automation & control
