Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
with Latch |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
727mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9202 |
Pin Count |
14 |
Output Type |
TTL |
Number of Elements |
2 |
Power Supplies |
+-5V |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Propagation Delay |
7 ns |
Quiescent Current |
1.5mA |
Response Time |
7 ns |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
4.75V~10.5V ±2.375V~5.75V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
7μA |
Power Supply Rejection Ratio (PSRR) |
86.02dB |
Supply Voltage Limit-Max |
6V |
Dual Supply Voltage |
5.25V |
Input Bias Current |
5μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
4mA 3mA 1.5mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
5μA @ ±5V |
CMRR, PSRR (Typ) |
86.02dB CMRR, 86.02dB PSRR |
Height |
950μm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9202EUD+ Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of TTL .As a result, it is designed with Tube package.As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparators family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.This is a typical comparator of type with Latch .Electronic comparator has a total of 2 elements.The board includes 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.14 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX9202 .A quiescent current of 1.5mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 4mA .Current supply exceeding 4mA could cause disfunction of the compartator.There is sufficient power to run the device from +-5V power supplies.
MAX9202EUD+ Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1.5mA
MAX9202EUD+ Applications
There are a lot of Maxim Integrated MAX9202EUD+ linear comparators applications.
- Wearable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- Set Top Boxes
- Motor drives
- Portable and Battery-Powered Systems
- General-Purpose, Low-Voltage Applications
- Mobile Phones
- Handheld Instruments
- DC/DC and AC/DC power supplies
- Industrial