Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
with Latch |
Subcategory |
Comparators |
Max Power Dissipation |
727mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9202 |
Pin Count |
14 |
Output Type |
TTL |
Number of Elements |
2 |
Power Supplies |
+-5V |
Nominal Supply Current |
4mA |
Max Supply Current |
4mA |
Propagation Delay |
7 ns |
Quiescent Current |
1.5mA |
Response Time |
7 ns |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
4.75V~10.5V ±2.375V~5.75V |
Input Offset Voltage (Vos) |
4mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Average Bias Current-Max (IIB) |
7μA |
Power Supply Rejection Ratio (PSRR) |
86.02dB |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
5μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Current - Quiescent (Max) |
4mA 3mA 1.5mA |
Voltage - Input Offset (Max) |
4mV @ ±5V |
Current - Input Bias (Max) |
5μA @ ±5V |
CMRR, PSRR (Typ) |
86.02dB CMRR, 86.02dB PSRR |
Height Seated (Max) |
1.1mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9202EUD+T Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of TTL .The chip is packaged with Tape & Reel (TR) .The comparator has a total of 14 terminals.The component belongs to the Comparators family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.The type of the chip can be classified as with Latch .Currently, it consists of only 2 elements.As a result, it contains 14 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 14 pins on the comparator.Try search MAX9202 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 1.5mA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 4mA in order to use the device normally.A current supply greater than 4mA may cause the comparator to malfunction.In order to run the device, there are only +-5V power supplies required.
MAX9202EUD+T Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1.5mA
MAX9202EUD+T Applications
There are a lot of Maxim Integrated MAX9202EUD+T linear comparators applications.
- Power management
- Alarm and Monitoring Circuits
- Set Top Boxes
- Ultra-Low Power Systems
- Portable Battery Monitoring
- Mobile Communications
- General-Purpose Portable Devices
- Wide Range VCO; MOS Clock Timers
- Consumer Medical Electronics
- Threshold Detectors