MAX9203EKA+T
| Parameters | |
|---|---|
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 2mA 1.6mA 800μA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9203 |
| Pin Count | 8 |
| Output Type | TTL |
| Number of Elements | 1 |
| Power Supplies | +-5V |
| Nominal Supply Current | -1mA |
| Max Supply Current | -1mA |
| Quiescent Current | 800μA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~10.5V ±2.375V~5.75V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 7μA |
MAX9203EKA+T Overview
A convenient transport package is provided in SOT-23-8 .The comparator has a TTL output.This chip is designed with the Tape & Reel (TR) package.The comparator has 8 terminals.The chip belongs to Comparators .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical with Latch comparator.Currently, it consists of only 1 elements.The pinout of the component starts from 8 pins it has.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX9203 .There is 800μA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current be -1mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds -1mA .The device can be run with +-5V power supplies.Electronic comparator is possible to input a maximum current of 5μA into the device.
MAX9203EKA+T Features
TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 800μA
MAX9203EKA+T Applications
There are a lot of Maxim Integrated MAX9203EKA+T linear comparators applications.
- Battery-Powered Electronics
- Mobile Communications
- Self-diagnostics
- Mobile Phones and Tablets
- Lithium ion battery monitoring
- Portable and Battery-Powered Systems
- Infotainment & cluster
- Zero-Crossing Detectors
- Security Detection Systems
- Pulse, Squarewave, and Time Delay Generators
