MAX9203ESA+
| Parameters | |
|---|---|
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 2mA 1.6mA 800μA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9203 |
| Pin Count | 8 |
| Output Type | TTL |
| Power Supplies | +-5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 2mA |
| Max Supply Current | 2mA |
| Propagation Delay | 7 ns |
| Quiescent Current | 800μA |
| Response Time | 7 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~10.5V ±2.375V~5.75V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
MAX9203ESA+ Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.This comparator is of the TTL output type.Ready for shipping in Tube package.You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparators family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical with Latch comparator.Electronic comparator includes 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.In order to find a solution that meets your specific needs, search MAX9203 for more pin-to-pin solutions.In this comparator, the quiescent current is 800μA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 2mA .An excess of current supply over 2mA could result in malfunction of the comparator.There is sufficient power to run the device from +-5V power supplies.You can input a maximum current of 5μA into this device.
MAX9203ESA+ Features
TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 800μA
MAX9203ESA+ Applications
There are a lot of Maxim Integrated MAX9203ESA+ linear comparators applications.
- Mobile Phones
- Alarm and Monitoring Circuits
- Metering Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Battery management and protection
- Wearable Devices
- Hand-Held Electronics
- Ultra-Low Power Systems
- General-Purpose Portable Devices
- Industrial
