MAX920ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX920 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 800nA |
| Output Current | 50mA |
| Max Supply Current | 800nA |
| Propagation Delay | 12 μs |
| Quiescent Current | 1.2μA |
| Response Time | 120000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX920ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type of this comparator is Open-Drain, Rail-to-Rail .As a result, it is designed with Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparators family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical General Purpose comparator.A total of 1 elements can be found in it.The board includes 8 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .8 pins are present on the comparator.You can search MAX920 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 1.2μA volts.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 800nA .If the current supply exceeds 800nA , the comparator might be damaged.A power supply of 2/5V is sufficient for the operation of the device.In this case, the part is from the Beyond-the-Rails? comparator series.
MAX920ESA+ Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX920ESA+ Applications
There are a lot of Maxim Integrated MAX920ESA+ linear comparators applications.
- Ultra-Low Power Systems
- DC/DC and AC/DC power supplies
- General-Purpose Portable Devices
- Battery-Powered Electronics
- Power Supervision
- Point of load regulators
- Laptop Computers
- Window Comparators
- Wearable Devices
- Self-diagnostics
