Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
571mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX920 |
Pin Count |
8 |
Output Type |
Open-Drain, Rail-to-Rail |
Number of Elements |
1 |
Power Supplies |
2/5V |
Nominal Supply Current |
800nA |
Output Current |
50mA |
Max Supply Current |
800nA |
Propagation Delay |
12 μs |
Quiescent Current |
1.2μA |
Response Time |
120000 ns |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.002μA |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
1nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
66.02dB CMRR, 80dB PSRR |
Propagation Delay (Max) |
12μs |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX920ESA+T Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.This comparator is of the Open-Drain, Rail-to-Rail output type.This device is designed in Tape & Reel (TR) case.The comparator has 8 terminals.The electrical component here belongs to the Comparators family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .Electronic comparator consists of 1 elements in total.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.The comparator has a pin count of 8 .In order to find a solution that meets your specific needs, search MAX920 for more pin-to-pin solutions.The comparator presents a quiescent current of 1.2μA volts.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 800nA .A current supply greater than 800nA may cause the comparator to malfunction.The device can be run with 2/5V power supplies.The part belongs to the series of comparator Beyond-the-Rails? .
MAX920ESA+T Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX920ESA+T Applications
There are a lot of Maxim Integrated MAX920ESA+T linear comparators applications.
- Body Control Modules
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Limit Comparators
- RC Timers
- Portable Battery Monitoring
- Handheld Instruments
- General Purpose Low Voltage Applications
- Infotainment & cluster
- Motor drives