MAX920EUK+T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX920 |
| Pin Count | 5 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Output Current | 50mA |
| Max Supply Current | 800nA |
| Propagation Delay | 12 μs |
| Quiescent Current | 1.2μA |
| Response Time | 120000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
MAX920EUK+T Overview
A convenient transport package is provided in SC-74A, SOT-753 .A comparator with a Open-Drain, Rail-to-Rail output is used here.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 5 terminals of the comparator.Electronic comparator is a part of Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type General Purpose .This is a 1 element comparator.The device is equipped with 5 pins.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .5 pins are available on the comparator.Alternatively, you may search for MAX920 to find more pin-to-pin solutions for your specific needs.There is 1.2μA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 800nA supply current.The compartator could be damaged if the current supply exceeds 800nA .Electronic comparator is possible to input up to 1nA current into the device.Comparator electronics comes from the series of Beyond-the-Rails? comparator parts.
MAX920EUK+T Features
Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX920EUK+T Applications
There are a lot of Maxim Integrated MAX920EUK+T linear comparators applications.
- Notebooks and PDAs
- Current and voltage sensing
- Battery-Powered Electronics
- Analog front end
- Infotainment and Clusters
- Window Comparators
- Motor drives
- Wide Range VCO; MOS Clock Timers
- General-Purpose Portable Devices
- Alarm and Monitoring Circuits
