MAX921CPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX921 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 3.2μA |
| Output Current | 50mA |
| Max Supply Current | 3.2μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 5μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Max (Vsup) | -0.3V |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX921CPA Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has a CMOS, TTL output.Ready for shipping in Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type with Voltage Reference .This element consists of 1 elements in total.The device contains 8 pins.Electronic comparator is recommended that the mounting type be Through Hole .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX921 .A quiescent current of 5μA is observed in this comparator.Electronic comparator has a Through Hole for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 3.2μA .Current supply exceeding 3.2μA could cause disfunction of the compartator.
MAX921CPA Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 5μA
MAX921CPA Applications
There are a lot of Maxim Integrated MAX921CPA linear comparators applications.
- Security Detection Systems
- Factory automation & control
- Multivibrators and High-Voltage Digital Logic Gates
- Portable and Battery-Powered Systems
- Mobile Communications
- Simple Analog-to-Digital Converters (ADCs)
- Limit Comparators
- Wide Range VCO; MOS Clock Timers
- Laptop Computers
- General Purpose Low Voltage Applications
