MAX921ESA+T
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX921 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 3.2μA |
| Output Current | 50mA |
| Max Supply Current | 3.2μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 5μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Current - Quiescent (Max) | 5μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
MAX921ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a comparator of type CMOS, TTL output on this device.As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .This is a typical comparator of type with Voltage Reference .A total of 1 elements can be found in it.There are 8 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX921 .There is 5μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires a nominal supply current of 3.2μA .If the current supply exceeds 3.2μA , the comparator might be damaged.
MAX921ESA+T Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 5μA
MAX921ESA+T Applications
There are a lot of Maxim Integrated MAX921ESA+T linear comparators applications.
- Motor drives
- Set Top Boxes
- General-Purpose, Low-Voltage Applications
- Wide Range VCO; MOS Clock Timers
- DC/DC and AC/DC power supplies
- Window Comparators, Multivibrators
- Mobile Phones and Tablets
- System control and monitoring
- Point of load regulators
- Consumer Medical Electronics
