MAX923CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX923 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.5μA |
| Output Current | 50mA |
| Max Supply Current | 4.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 7.5μA |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Max (Vsup) | -0.3V |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Length | 9.375mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX923CPA+ Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has a type CMOS, TTL output.As a result, it is designed with Tube package.There are 8 terminals on the comparator.The component belongs to the Comparators family of electrical components.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as with Voltage Reference .There are a total of 2 elements in it.The pinout of the component starts from 8 pins it has.Through Hole universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX923 .A quiescent current of 7.5μA is displayed by this comparator.The PCB or other board can be mounted using the Through Hole on it.Normal operation of the device requires a nominal supply current of 4.5μA .A supply current exceeding 4.5μA may result in the comparator malfunctioning.
MAX923CPA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 7.5μA
MAX923CPA+ Applications
There are a lot of Maxim Integrated MAX923CPA+ linear comparators applications.
- Hand-Held Electronics
- Lithium ion battery monitoring
- Self-diagnostics
- Automotive
- General-Purpose, Low-Voltage Applications
- Body Control Modules
- Window Comparators, Multivibrators
- RC Timers
- DC/DC and AC/DC power supplies
- Handheld Instruments
