MAX923CUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX923 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 4.5μA |
| Output Current | 50mA |
| Max Supply Current | 4.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 7.5μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Max (Vsup) | -0.3V |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX923CUA+ Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.Output type CMOS, TTL is used for this comparator.The part will be shipped by Tube .The comparator has 8 terminals.Electronic comparator is a part of Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator can be classified as a with Voltage Reference chip.This element consists of 2 elements in total.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.Electronic comparator has 8 pins.You can search MAX923 if you are looking for more pin-to-pin solutions.A quiescent current of 7.5μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 4.5μA for normal use.If the current supply exceeds 4.5μA , the comparator could malfunction.
MAX923CUA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 7.5μA
MAX923CUA+ Applications
There are a lot of Maxim Integrated MAX923CUA+ linear comparators applications.
- Power Supervision
- Zero-Crossing Detectors
- Wireless Base Stations
- Automotive
- Metering Systems
- System control and monitoring
- Threshold Detectors
- General-Purpose, Low-Voltage Applications
- Infotainment and Clusters
- Body Control Modules
