MAX924CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | MAX924 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 6.5μA |
| Output Current | 50mA |
| Max Supply Current | 6.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 11μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 10mV |
| Supply Voltage Limit-Max | 12V |
| Neg Supply Voltage-Max (Vsup) | -0.3V |
| Current - Quiescent (Max) | 11μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX924CPE+ Overview
In order to facilitate transportation, it is packaged in 16-DIP (0.300, 7.62mm) .There is a CMOS, TTL output type for this comparator.As a result, it is designed with Tube package.The comparator has 16 terminals.Electronic comparator is a part of Comparator family.A comparator supplied with 3V voltage can complete many demanding tasks.A comparator of this type is typically of type with Voltage Reference .Currently, it consists of only 4 elements.There are 16 pins on this board.The type of mounting recommended is Through Hole .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .16 pins are present on the comparator.If you require more pin-to-pin solutions, search MAX924 for more options.The comparator presents a quiescent current of 11μA volts.There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 6.5μA when using the device.A current supply greater than 6.5μA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.
MAX924CPE+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 11μA
MAX924CPE+ Applications
There are a lot of Maxim Integrated MAX924CPE+ linear comparators applications.
- Power management
- Security Detection Systems
- Mobile Phones
- Window Comparators
- Metering Systems
- Battery-Powered Electronics
- Lithium ion battery monitoring
- Building automation
- Handheld Instruments
- Battery management and protection
