MAX924EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Base Part Number | MAX924 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 6.5μA |
| Output Current | 50mA |
| Max Supply Current | 6.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 11μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Supply Voltage Limit-Max | 12V |
| Neg Supply Voltage-Max (Vsup) | -0.3V |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Propagation Delay (Max) | 12μs |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX924EPE+ Overview
For convenience, it is packaged in 16-DIP (0.300, 7.62mm) .Output type CMOS, TTL is used for this comparator.This device is designed in Tube case.There are16 terminals on the comparator.The chip belongs to Comparator .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .Electronic comparator is possible to classify the chip as with Voltage Reference .There are a total of 4 elements in it.A total of 16 pins are included.Through Hole universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 16 pins.You can find more pin-to-pin solutions by searching MAX924 .There is a quiescent current of 11μA in this comparator.A Through Hole is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 6.5μA for normal use.If the current supply exceeds 6.5μA , the comparator could malfunction.This device requires 3/5V power supplies to operate.
MAX924EPE+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 11μA
MAX924EPE+ Applications
There are a lot of Maxim Integrated MAX924EPE+ linear comparators applications.
- Point of load regulators
- Building automation
- Mobile Communications
- Ultra-Low Power Systems
- Alarm and Monitoring Circuits
- Appliances
- Battery-Powered Electronics
- Mobile Phones
- Window Comparators, Multivibrators
- Battery management and protection
