MAX924ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Max Power Dissipation | 696mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX924 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 6.5μA |
| Output Current | 50mA |
| Max Supply Current | 6.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 11μA |
| Turn On Delay Time | 12 μs |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Supply Voltage Limit-Max | 12V |
| Current - Quiescent (Max) | 11μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 50mA |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX924ESE+ Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the CMOS, TTL output type.We ship the part through Tube .As you can see, the comparator has16 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3V .The type of the chip can be classified as with Voltage Reference .The pinout of the component starts from 16 pins it has.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 16 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX924 .The comparator displays a quiescent current of 11μA .A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 6.5μA for normal use.A supply current exceeding 6.5μA may result in the comparator malfunctioning.In order to operate the device, 3/5V power supplies are sufficient.
MAX924ESE+ Features
CMOS, TTL output capability
with Voltage Reference IC
Operates under -40°C~85°C
Quiescent Current: 11μA
MAX924ESE+ Applications
There are a lot of Maxim Integrated MAX924ESE+ linear comparators applications.
- Wireless Base Stations
- Security Detection Systems
- Portable Battery Monitoring
- High-Speed Differential Line Receiver
- Threshold Detectors
- Pulse, Squarewave, and Time Delay Generators
- General Purpose Low Voltage Applications
- High-Speed Sampling Circuits
- Alarm and Monitoring Circuits
- Notebooks and PDAs
