MAX931CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | MAX931 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 3.2μA |
| Output Current | 15μA |
| Max Supply Current | 3.2μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 4μA |
| Turn On Delay Time | 12 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Current - Quiescent (Max) | 4μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX931CSA+ Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, TTL .Electronic comparator is shipped by Tube .Electronic comparator is possible to find the 8 terminals of the comparator.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Voltage Reference .The pinout of the component starts from 8 pins it has.In general, mounting type Surface Mount is recommended.The operating temperature should be set to 0°C~70°C to avoid mal-function.There are 8 pins on the comparator.In order to find a solution that meets your specific needs, search MAX931 for more pin-to-pin solutions.This comparator presents a quiescent current of 4μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 3.2μA in order to use the device normally.A supply current exceeding 3.2μA may result in the comparator malfunctioning.
MAX931CSA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Operates under 0°C~70°C
Quiescent Current: 4μA
MAX931CSA+ Applications
There are a lot of Maxim Integrated MAX931CSA+ linear comparators applications.
- Body Control Modules
- Appliances
- Building automation
- Threshold Detectors
- Point of load regulators
- Laptop Computers
- Portable and Battery-Powered Systems
- Battery-Powered Electronics
- Wireless Base Stations
- Portable Battery Monitoring
