MAX931ESA+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | MAX931 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Nominal Supply Current | 3.2μA |
| Output Current | 15μA |
| Max Supply Current | 3.2μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 4μA |
| Turn On Delay Time | 12 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Current - Quiescent (Max) | 4μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
MAX931ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a CMOS, TTL output.The part is shipped by Tape & Reel (TR) .There are8 terminals on the comparator.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical with Voltage Reference comparator.Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .This comparator has 8 pins.You can search MAX931 if you are looking for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 4μA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 3.2μA .A current supply greater than 3.2μA may result in the comparator malfunctioning.
MAX931ESA+T Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 4μA
MAX931ESA+T Applications
There are a lot of Maxim Integrated MAX931ESA+T linear comparators applications.
- Hand-Held Electronics
- Appliances
- Automatic Test Equipment
- Threshold Detectors
- Current and voltage sensing
- Notebooks and PDAs
- Consumer Medical Electronics
- Limit Comparators
- System control and monitoring
- Building automation
