MAX932CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX932 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 11V |
| Nominal Supply Current | 4.5μA |
| Output Current | 15μA |
| Max Supply Current | 4.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6μA |
| Turn On Delay Time | 12 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Dual Supply Voltage | 5V |
| Current - Quiescent (Max) | 6μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX932CPA+ Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .There is a CMOS, TTL output type for this comparator.We ship the part through Tube .You can find 8 terminals of the comparator.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical with Voltage Reference comparator.The total number of elements is 2 .The device includes 8 pins.Electronic comparator is recommended that the mounting type be Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX932 .There is a quiescent current of 6μA in this comparator.Electronic comparator has a Through Hole for mounting on PCB or other boards.The nominal supply current of the device should be 4.5μA for normal use.A current supply greater than 4.5μA may result in the comparator malfunctioning.The normal operation of the system requires 9V operating voltage.
MAX932CPA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 6μA
MAX932CPA+ Applications
There are a lot of Maxim Integrated MAX932CPA+ linear comparators applications.
- Window Comparators, Multivibrators
- RC Timers
- General-Purpose Portable Devices
- Limit Comparators
- Metering Systems
- General Purpose Low Voltage Applications
- Wearable Devices
- Mobile Phones and Tablets
- Window Comparators
- Factory automation & control
