MAX932ESA-T
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX932 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 11V |
| Nominal Supply Current | 4.5μA |
| Output Current | 15μA |
| Max Supply Current | 4.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Current - Quiescent (Max) | 6μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
MAX932ESA-T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, TTL is being used.This device is designed in Tape & Reel (TR) case.You can find 8 terminals of the comparator.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical with Voltage Reference comparator.A total of 2 elements can be found in it.The device is equipped with 8 pins.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator consists of 8 pins.If you require more pin-to-pin solutions, search MAX932 for more options.A quiescent current of 6μA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 4.5μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 4.5μA .
MAX932ESA-T Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA
MAX932ESA-T Applications
There are a lot of Maxim Integrated MAX932ESA-T linear comparators applications.
- Analog front end
- Limit Comparators
- Appliances
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Lithium ion battery monitoring
- Laptop Computers
- Alarm and Monitoring Circuits
- High-Speed Differential Line Receiver
- Zero-Crossing Detectors
