MAX933ESA+
| Parameters | |
|---|---|
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | MAX933 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Nominal Supply Current | 4.5mA |
| Output Current | 15μA |
| Max Supply Current | 4.5mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Current - Quiescent (Max) | 6μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
MAX933ESA+ Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, TTL output type for this comparator.The part is shipped by Tube .As you can see, the comparator has8 terminals.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as with Voltage Reference .In total, it contains 2 elements.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .8 pins are present on the comparator.If you require more pin-to-pin solutions, search MAX933 for more options.A quiescent current of 6μA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 4.5mA when using the device.A supply current exceeding 4.5mA may result in the comparator malfunctioning.
MAX933ESA+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA
MAX933ESA+ Applications
There are a lot of Maxim Integrated MAX933ESA+ linear comparators applications.
- Current and voltage sensing
- Power Supervision
- Motor drives
- General-Purpose Portable Devices
- Window Comparators
- System control and monitoring
- Analog front end
- Factory automation & control
- Battery management and protection
- Automatic Test Equipment
