MAX933ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | MAX933 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Nominal Supply Current | 4.5μA |
| Output Current | 15μA |
| Max Supply Current | 4.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6μA |
| Turn On Delay Time | 12 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Current - Quiescent (Max) | 6μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX933ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has an output type of CMOS, TTL .This chip is designed with the Tape & Reel (TR) package.There are 8 terminals on the comparator.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.The type of the chip can be classified as with Voltage Reference .There are a total of 2 elements in it.The device includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has 8 pins.You can find more pin-to-pin solutions by searching MAX933 .There is a quiescent current of 6μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 4.5μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 4.5μA .
MAX933ESA+T Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA
MAX933ESA+T Applications
There are a lot of Maxim Integrated MAX933ESA+T linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- General-Purpose Portable Devices
- General-Purpose, Low-Voltage Applications
- Wireless Base Stations
- Simple Analog-to-Digital Converters (ADCs)
- System control and monitoring
- Ultra-Low Power Systems
- Power Supervision
- Analog front end
- Current and voltage sensing
