MAX934CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX934 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 11V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Nominal Supply Current | 6.5μA |
| Output Current | 15μA |
| Max Supply Current | 6.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 8.5μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Current - Quiescent (Max) | 8.5μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX934CPE+ Overview
The product is packaged in 16-DIP (0.300, 7.62mm) in order to facilitate transportation.A comparator with a CMOS, TTL output is used here.The part will be shipped by Tube .The comparator has 16 terminals.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.This is a typical comparator of type with Voltage Reference .This is a 4 element comparator.The device is equipped with 16 pins.In general, mounting type Through Hole is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 16 pins.In order to find a solution that meets your specific needs, search MAX934 for more pin-to-pin solutions.There is a quiescent current of 8.5μA in this comparator.The board has a Through Hole for mounting on a PCB or any other board.The nominal supply current of the device should be 6.5μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 6.5μA .
MAX934CPE+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 8.5μA
MAX934CPE+ Applications
There are a lot of Maxim Integrated MAX934CPE+ linear comparators applications.
- Notebooks and PDAs
- System control and monitoring
- Self-diagnostics
- Mobile Phones
- Multivibrators and High-Voltage Digital Logic Gates
- Laptop Computers
- Hand-Held Electronics
- Factory automation & control
- General-Purpose Portable Devices
- Power Supervision
