MAX934CSE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Max Power Dissipation | 696mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX934 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1.25V |
| Nominal Supply Current | 6.5μA |
| Output Current | 15μA |
| Max Supply Current | 6.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 8.5μA |
| Turn On Delay Time | 12 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Current - Quiescent (Max) | 8.5μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX934CSE+T Overview
For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, TTL output type.The part will be shipped by Tape & Reel (TR) .There are 16 terminals on the comparator.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical with Voltage Reference comparator.There are a total of 4 elements in it.The device includes 16 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 16 .You can search MAX934 if you are looking for more pin-to-pin solutions.There is 8.5μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 6.5μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 6.5μA .
MAX934CSE+T Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 8.5μA
MAX934CSE+T Applications
There are a lot of Maxim Integrated MAX934CSE+T linear comparators applications.
- Battery-Powered Electronics
- Pulse, Squarewave, and Time Delay Generators
- Notebooks and PDAs
- Automatic Test Equipment
- Ultra-Low Power Systems
- Consumer Medical Electronics
- High-Speed Differential Line Receiver
- Infotainment & cluster
- Multivibrators and High-Voltage Digital Logic Gates
- System control and monitoring
