MAX934EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX934 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 11V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Nominal Supply Current | 6.5μA |
| Output Current | 15μA |
| Max Supply Current | 6.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 8.5μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Current - Quiescent (Max) | 8.5μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX934EPE+ Overview
A convenient packaging is provided in the form of 16-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, TTL is being used.The chip is packaged with Tube .As you can see, the comparator has16 terminals.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical with Voltage Reference comparator.This element consists of 4 elements in total.The device is equipped with 16 pins.Electronic comparator is recommended that the mounting type be Through Hole .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.There are 16 pins on the comparator.Try search MAX934 to get more pin-to-pin solutions for your special needs.The comparator presents a quiescent current of 8.5μA volts.The PCB or other board can be mounted using the Through Hole on it.For normal use of the device, the nominal supply current should be 6.5μA .A current supply greater than 6.5μA may result in the comparator malfunctioning.
MAX934EPE+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 8.5μA
MAX934EPE+ Applications
There are a lot of Maxim Integrated MAX934EPE+ linear comparators applications.
- Handheld Instruments
- High-Speed Differential Line Receiver
- Factory automation & control
- Building automation
- Multivibrators and High-Voltage Digital Logic Gates
- Body Control Modules
- General-Purpose, Low-Voltage Applications
- Current and voltage sensing
- Battery-Powered Electronics
- Window Comparators
