MAX934ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Max Power Dissipation | 696mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX934 |
| Pin Count | 16 |
| Output Type | CMOS, TTL |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1.25V |
| Nominal Supply Current | 6.5μA |
| Output Current | 15μA |
| Max Supply Current | 6.5μA |
| Propagation Delay | 12 μs |
| Quiescent Current | 8.5μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Current - Quiescent (Max) | 8.5μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX934ESE+ Overview
In order to make transportation easier, it is packaged in 16-SOIC (0.154, 3.90mm Width) .Output type CMOS, TTL is used for this comparator.The part will be shipped by Tube .There are 16 terminals on the comparator.A comparator supplied with 5V voltage can complete many demanding tasks.This is a typical comparator of type with Voltage Reference .There are a total of 4 elements in it.The pinout of the component starts from 16 pins it has.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator consists of 16 pins.Alternatively, you may search for MAX934 to find more pin-to-pin solutions for your specific needs.There is 8.5μA current flowing in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal operation of the device requires 6.5μA supply current.An excess of current supply over 6.5μA could result in malfunction of the comparator.
MAX934ESE+ Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 8.5μA
MAX934ESE+ Applications
There are a lot of Maxim Integrated MAX934ESE+ linear comparators applications.
- Appliances
- Wearable Devices
- Window Comparators
- High-Speed Differential Line Receiver
- Infotainment & cluster
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Lithium ion battery monitoring
- Building automation
- Mobile Communications
