MAX941CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch, Shutdown |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX941 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 600μA |
| Max Supply Current | 600μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 700μA |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Max Input Current | 150nA |
| Input Bias Current | 300nA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX941CPA+ Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.This comparator is of the CMOS, Push-Pull, TTL output type.Ready for shipping in Tube package.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparators family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.This is a typical comparator of type with Latch, Shutdown .This element consists of 1 elements in total.The pinout of the component starts from 8 pins it has.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching MAX941 .A quiescent current of 700μA is displayed by this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 600μA in order to use the device normally.An excess of current supply over 600μA could result in malfunction of the comparator.Electronic comparator is possible to input up to 150nA current into the device.Normal operation requires 5V operating supply voltage.
MAX941CPA+ Features
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 700μA
MAX941CPA+ Applications
There are a lot of Maxim Integrated MAX941CPA+ linear comparators applications.
- Threshold Detectors
- Window Comparators
- Lithium ion battery monitoring
- Motor drives
- Current and voltage sensing
- Factory automation & control
- Wireless Base Stations
- Window Comparators
- RC Timers
- Laptop Computers
