banner_page

MAX941EPA+

Through Hole Tube 80 ns μs Linear Comparators 300nA pA 2009 600μA μA 2mV mV Through Hole


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX941EPA+
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 312
  • Description: Through Hole Tube 80 ns μs Linear Comparators 300nA pA 2009 600μA μA 2mV mV Through Hole (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Latch, Shutdown
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 330mW
Technology BIPOLAR
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 2.54mm
Base Part Number MAX941
Pin Count 8
Output Type CMOS, Push-Pull, TTL
Number of Elements 1
Power Supplies 3/5V
Nominal Supply Current 600μA
Max Supply Current 600μA
Propagation Delay 80 ns
Quiescent Current 700μA
Response Time 80 ns
Common Mode Rejection Ratio 81.94 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 2mV
Average Bias Current-Max (IIB) 0.4μA
Supply Voltage Limit-Max 6.5V
Max Input Current 150nA
Input Bias Current 300nA
Current - Quiescent (Max) 700μA
Voltage - Input Offset (Max) 2mV @ 5.5V
Current - Input Bias (Max) 0.15μA @ 5.5V
CMRR, PSRR (Typ) 81.94dB CMRR, 81.94dB PSRR
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX941EPA+ Overview


A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, Push-Pull, TTL is being used.We ship the part through Tube .The comparator has 8 terminals.The chip belongs to Comparator .Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.When it comes to types, this comparator is a typical with Latch, Shutdown .Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.The type of mounting recommended is Through Hole .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX941 .There is 700μA current flowing in this comparator.A Through Hole is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 600μA for normal use.Current supply exceeding 600μA could cause disfunction of the compartator.3/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 150nA current into the device.

MAX941EPA+ Features


CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 700μA

MAX941EPA+ Applications


There are a lot of Maxim Integrated MAX941EPA+ linear comparators applications.

  • Point of load regulators
  • Window Comparators
  • Ultra-Low Power Systems
  • Analog front end
  • Zero-Crossing Detectors
  • Infotainment & cluster
  • Hand-Held Electronics
  • Set Top Boxes
  • Handheld Instruments
  • Self-diagnostics

Write a review

Note: HTML is not translated!
    Bad           Good