banner_page

MAX941ESA+

Surface Mount Tube 80 ns μs Linear Comparators 150nA pA 2009 700μA μA 2mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX941ESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 738
  • Description: Surface Mount Tube 80 ns μs Linear Comparators 150nA pA 2009 700μA μA 2mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Latch, Shutdown
Terminal Finish Matte Tin (Sn)
Subcategory Comparators
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Base Part Number MAX941
Pin Count 8
Output Type CMOS, Push-Pull, TTL
Power Supplies 3/5V
Number of Circuits 1
Nominal Supply Current 700μA
Max Supply Current 700μA
Propagation Delay 80 ns
Quiescent Current 700μA
Turn On Delay Time 80 ns
Response Time 80 ns
Common Mode Rejection Ratio 81.94 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 2mV
Average Bias Current-Max (IIB) 0.4μA
Supply Voltage Limit-Max 6.5V
Input Bias Current 150nA
Voltage - Input Offset (Max) 2mV @ 5.5V
Current - Input Bias (Max) 0.15μA @ 5.5V
CMRR, PSRR (Typ) 81.94dB CMRR, 81.94dB PSRR
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX941ESA+ Overview


The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, TTL .Ready for shipping in Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.Other Comparators like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.This is a typical comparator of type with Latch, Shutdown .The device is equipped with 8 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has 8 pins.Alternatively, you may search for MAX941 to find more pin-to-pin solutions for your specific needs.There is 700μA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 700μA .If the current supply exceeds 700μA , the comparator might be damaged.There is sufficient power to run the device from 3/5V power supplies.

MAX941ESA+ Features


CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Operates under -40°C~85°C
Quiescent Current: 700μA

MAX941ESA+ Applications


There are a lot of Maxim Integrated MAX941ESA+ linear comparators applications.

  • Threshold Detectors
  • General-Purpose Portable Devices
  • Set Top Boxes
  • Infotainment and Clusters
  • Consumer Medical Electronics
  • Zero-Crossing Detectors
  • Self-diagnostics
  • Battery-Powered Electronics
  • Motor drives
  • Pulse, Squarewave, and Time Delay Generators

Write a review

Note: HTML is not translated!
    Bad           Good