MAX941EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch, Shutdown |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX941 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Power Supplies | 3/5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 600μA |
| Max Supply Current | 600μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 700μA |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 150nA |
| Input Bias Current | 150nA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 950μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX941EUA+ Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, TTL output is used here.The part is shipped by Tube .The comparator has 8 terminals.The chip belongs to Comparators .With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as with Latch, Shutdown .Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.Search MAX941 to find more pin-to-pin solutions.There is a quiescent current of 700μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 600μA .A supply current exceeding 600μA may result in the comparator malfunctioning.The device can be run with 3/5V power supplies.Electronic comparator is possible to input up to 150nA current into the device.
MAX941EUA+ Features
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX941EUA+ Applications
There are a lot of Maxim Integrated MAX941EUA+ linear comparators applications.
- Body Control Modules
- Consumer Medical Electronics
- Security Detection Systems
- Ultra-Low Power Systems
- General-Purpose, Low-Voltage Applications
- Threshold Detectors
- Portable Battery Monitoring
- Infotainment & cluster
- Multivibrators and High-Voltage Digital Logic Gates
- Portable and Battery-Powered Systems
