Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch, Shutdown |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
330mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX941 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, TTL |
Number of Elements |
1 |
Power Supplies |
3/5V |
Nominal Supply Current |
600μA |
Max Supply Current |
600μA |
Propagation Delay |
80 ns |
Quiescent Current |
700μA |
Response Time |
80 ns |
Common Mode Rejection Ratio |
81.94 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Input Offset Voltage (Vos) |
3mV |
Average Bias Current-Max (IIB) |
0.4μA |
Supply Voltage Limit-Max |
6.5V |
Max Input Current |
150nA |
Input Bias Current |
150nA |
Current - Quiescent (Max) |
700μA |
Voltage - Input Offset (Max) |
3mV @ 5.5V |
Current - Input Bias (Max) |
0.15μA @ 5.5V |
CMRR, PSRR (Typ) |
81.94dB CMRR, 81.94dB PSRR |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX941EUA-T Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.This comparator is of the CMOS, Push-Pull, TTL output type.This chip is designed with the Tape & Reel (TR) package.You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.It's a typical with Latch, Shutdown comparator.This element consists of 1 elements in total.There are 8 pins on this board.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator consists of 8 pins.You can find more pin-to-pin solutions by searching MAX941 .A quiescent current of 700μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 600μA .Current supply exceeding 600μA could cause disfunction of the compartator.The device can be operated with 3/5V power supplies.You are allowed to input a maximum current of 150nA into the device.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
MAX941EUA-T Features
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX941EUA-T Applications
There are a lot of Maxim Integrated MAX941EUA-T linear comparators applications.
- High-Speed Sampling Circuits
- Lithium ion battery monitoring
- Security Detection Systems
- Factory automation & control
- Threshold Detectors
- High-Speed Differential Line Receiver
- Metering Systems
- Infotainment & cluster
- Set Top Boxes
- Laptop Computers