MAX942AUA+

Surface Mount Tube 80 ns μs Linear Comparators 150nA pA 2012 500μA μA 3mV mV Surface Mount

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX942AUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 556
Description: Surface Mount Tube 80 ns μs Linear Comparators 150nA pA 2012 500μA μA 3mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	General Purpose
Terminal Finish	Matte Tin (Sn)
Subcategory	Comparators
Max Power Dissipation	727mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	MAX942
Pin Count	8
Output Type	CMOS, Push-Pull, TTL
Number of Elements	2
Power Supplies	3/5V
Nominal Supply Current	500μA
Max Supply Current	500μA
Propagation Delay	80 ns
Quiescent Current	600μA
Response Time	80 ns
Common Mode Rejection Ratio	81.94 dB
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Input Offset Voltage (Vos)	3mV
Average Bias Current-Max (IIB)	0.4μA
Supply Voltage Limit-Max	6.5V
Input Bias Current	150nA
Current - Quiescent (Max)	600μA
Voltage - Input Offset (Max)	3mV @ 5.5V
Current - Input Bias (Max)	0.15μA @ 5.5V
CMRR, PSRR (Typ)	81.94dB CMRR, 81.94dB PSRR
Height Seated (Max)	1.1mm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX942AUA+ Overview

Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.There is a comparator of type CMOS, Push-Pull, TTL output on this device.This device is designed in Tube case.As you can see, the comparator has8 terminals.The component belongs to the Comparators family of electrical components.A comparator supplied with 3V voltage can complete many demanding tasks.In general, the chip type can be classified as General Purpose .There are a total of 2 elements in it.The device includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.There are 8 pins on the comparator.Try search MAX942 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 600μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 500μA for normal use.The compartator could be damaged if the current supply exceeds 500μA .The device can be powered by 3/5V power supplies.