banner_page

MAX942CPA+

Through Hole Tube 80 ns μs Linear Comparators 300nA pA 1999 350μA μA 2mV mV Through Hole


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX942CPA+
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 668
  • Description: Through Hole Tube 80 ns μs Linear Comparators 300nA pA 1999 350μA μA 2mV mV Through Hole (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 1999
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 727mW
Technology BIPOLAR
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Base Part Number MAX942
Pin Count 8
Output Type CMOS, Push-Pull, TTL
Operating Supply Voltage 5V
Number of Circuits 2
Nominal Supply Current 350μA
Max Supply Current 500μA
Propagation Delay 80 ns
Quiescent Current 600μA
Response Time 80 ns
Common Mode Rejection Ratio 81.94 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 2mV
Average Bias Current-Max (IIB) 0.3μA
Power Supply Rejection Ratio (PSRR) 81.94dB
Max Input Current 150nA
Input Bias Current 300nA
Current - Quiescent (Max) 600μA
Voltage - Input Offset (Max) 2mV @ 5.5V
Current - Input Bias (Max) 0.15μA @ 5.5V
CMRR, PSRR (Typ) 81.94dB CMRR, 81.94dB PSRR
Height 4.45mm
Length 9.91mm
Width 7.87mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX942CPA+ Overview


To facilitate transportation, it comes packaged in 8-DIP (0.300, 7.62mm) .There is a CMOS, Push-Pull, TTL output type for this comparator.As a result, it is designed with Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.It's a typical General Purpose comparator.There are 8 pins on this board.Electronic comparator is recommended to mount using type Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search MAX942 for more options.There is a quiescent current of 600μA in this comparator.This component has a Through Hole mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 350μA .A supply current exceeding 500μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 150nA into the device.The operating supply voltage for normal operation should be 5V .

MAX942CPA+ Features


CMOS, Push-Pull, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 600μA

MAX942CPA+ Applications


There are a lot of Maxim Integrated MAX942CPA+ linear comparators applications.

  • Notebooks and PDAs
  • Window Comparators
  • Simple Analog-to-Digital Converters (ADCs)
  • Laptop Computers
  • High-Speed Differential Line Receiver
  • RC Timers
  • Automatic Test Equipment
  • Hand-Held Electronics
  • Ultra-Low Power Systems
  • Mobile Phones

Write a review

Note: HTML is not translated!
    Bad           Good