MAX942CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX942 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 600μA |
| Turn On Delay Time | 80 ns |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 150nA |
| Current - Quiescent (Max) | 600μA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX942CSA+T Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a component of the Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 3V voltage.Electronic comparator is possible to classify the chip as General Purpose .This is a 2 element comparator.The board includes 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX942 .The comparator presents a quiescent current of 600μA volts.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 500μA for normal use.A supply current exceeding 500μA may result in the comparator malfunctioning.The device can be powered by 3/5V power supplies.
MAX942CSA+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 600μA
MAX942CSA+T Applications
There are a lot of Maxim Integrated MAX942CSA+T linear comparators applications.
- Building automation
- Wide Range VCO; MOS Clock Timers
- System control and monitoring
- Motor drives
- Power Supervision
- Self-diagnostics
- Body Control Modules
- Battery management and protection
- Window Comparators, Multivibrators
- Metering Systems
