banner_page

MAX942CUA+

Surface Mount Tube 80 ns μs Linear Comparators 300nA pA 2014 500μA μA 3mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX942CUA+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 186
  • Description: Surface Mount Tube 80 ns μs Linear Comparators 300nA pA 2014 500μA μA 3mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2014
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Max Power Dissipation 727mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Terminal Pitch 0.635mm
Base Part Number MAX942
Pin Count 8
Output Type CMOS, Push-Pull, TTL
Number of Elements 2
Power Supplies 3/5V
Nominal Supply Current 500μA
Max Supply Current 500μA
Propagation Delay 80 ns
Quiescent Current 600μA
Response Time 80 ns
Common Mode Rejection Ratio 81.94 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 3mV
Average Bias Current-Max (IIB) 0.3μA
Supply Voltage Limit-Max 7V
Max Input Current 150nA
Input Bias Current 300nA
Current - Quiescent (Max) 600μA
Voltage - Input Offset (Max) 3mV @ 5.5V
Current - Input Bias (Max) 0.15μA @ 5.5V
CMRR, PSRR (Typ) 81.94dB CMRR, 81.94dB PSRR
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX942CUA+ Overview


To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type CMOS, Push-Pull, TTL output on this device.Electronic comparator is shipped by Tube .The comparator has 8 terminals.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.The type of the chip can be classified as General Purpose .In total, it contains 2 elements.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.Alternatively, you may search for MAX942 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 600μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 500μA .If the current supply exceeds 500μA , the comparator might be damaged.This device requires 3/5V power supplies to operate.A maximum current of 150nA can be supplied to the device.

MAX942CUA+ Features


CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 600μA

MAX942CUA+ Applications


There are a lot of Maxim Integrated MAX942CUA+ linear comparators applications.

  • Infotainment and Clusters
  • General-Purpose, Low-Voltage Applications
  • General Purpose Low Voltage Applications
  • Threshold Detectors
  • Mobile Phones
  • Multivibrators and High-Voltage Digital Logic Gates
  • Wearable Devices
  • Analog front end
  • Set Top Boxes
  • Automatic Test Equipment

Write a review

Note: HTML is not translated!
    Bad           Good