Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
727mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
2 |
Supply Voltage |
3V |
Base Part Number |
MAX942 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, TTL |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
500μA |
Max Supply Current |
500μA |
Propagation Delay |
80 ns |
Quiescent Current |
600μA |
Turn On Delay Time |
80 ns |
Response Time |
80 ns |
Common Mode Rejection Ratio |
81.94 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Input Offset Voltage (Vos) |
2mV |
Average Bias Current-Max (IIB) |
0.4μA |
Power Supply Rejection Ratio (PSRR) |
81.94dB |
Supply Voltage Limit-Max |
6.5V |
Max Input Current |
150nA |
Input Bias Current |
150nA |
Current - Quiescent (Max) |
600μA |
Voltage - Input Offset (Max) |
2mV @ 5.5V |
Current - Input Bias (Max) |
0.15μA @ 5.5V |
CMRR, PSRR (Typ) |
81.94dB CMRR, 81.94dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX942ESA-T Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Push-Pull, TTL output is used here.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Electronic comparator can be classified as a General Purpose chip.A total of 2 elements can be found in it.The device includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .8 pins are available on the comparator.You can search MAX942 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 600μA volts.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 500μA .A current supply greater than 500μA may result in the comparator malfunctioning.There is sufficient power to run the device from 3/5V power supplies.You can input a maximum current of 150nA into this device.
MAX942ESA-T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 600μA
MAX942ESA-T Applications
There are a lot of Maxim Integrated MAX942ESA-T linear comparators applications.
- Factory automation & control
- DC/DC and AC/DC power supplies
- Zero-Crossing Detectors
- RC Timers
- Battery-Powered Electronics
- Analog front end
- Current and voltage sensing
- Infotainment and Clusters
- Appliances
- Automotive