MAX942ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX942 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Supply Current-Max | 0.6mA |
| Response Time | 80 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 6.5V |
| Current - Quiescent (Max) | 600μA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Propagation Delay (Max) | 80ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX942ESA+T Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Push-Pull, TTL output is used here.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .A comparator supplied with 3V voltage can complete many demanding tasks.The type of the chip can be classified as General Purpose .A total of 2 elements can be found in it.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .Electronic comparator has 8 pins.You can search MAX942 if you are looking for more pin-to-pin solutions.The device can be operated with 3/5V power supplies.The part can be supplied with a minimum current of 0.6mA .
MAX942ESA+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
MAX942ESA+T Applications
There are a lot of Maxim Integrated MAX942ESA+T linear comparators applications.
- High-Speed Sampling Circuits
- General Purpose Low Voltage Applications
- Handheld Instruments
- Motor drives
- RC Timers
- Appliances
- Hand-Held Electronics
- Mobile Phones
- Window Comparators
- Window Comparators, Multivibrators
