banner_page

MAX942EUA+

Surface Mount Tube 80 ns μs Linear Comparators 150nA pA 2004 500μA μA 3mV mV Surface Mount


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX942EUA+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 635
  • Description: Surface Mount Tube 80 ns μs Linear Comparators 150nA pA 2004 500μA μA 3mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2004
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Terminal Finish Matte Tin (Sn)
Subcategory Comparators
Max Power Dissipation 727mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3V
Terminal Pitch 0.65mm
Base Part Number MAX942
Pin Count 8
Output Type CMOS, Push-Pull, TTL
Operating Supply Voltage 5V
Number of Elements 2
Nominal Supply Current 500μA
Max Supply Current 500μA
Propagation Delay 80 ns
Quiescent Current 600μA
Response Time 80 ns
Common Mode Rejection Ratio 81.94 dB
Voltage - Supply, Single/Dual (±) 2.7V~5.5V
Input Offset Voltage (Vos) 3mV
Average Bias Current-Max (IIB) 0.4μA
Power Supply Rejection Ratio (PSRR) 81.94dB
Max Input Current 150nA
Input Bias Current 150nA
Current - Quiescent (Max) 600μA
Voltage - Input Offset (Max) 3mV @ 5.5V
Current - Input Bias (Max) 0.15μA @ 5.5V
CMRR, PSRR (Typ) 81.94dB CMRR, 81.94dB PSRR
Height 950μm
Length 3.05mm
Width 3.05mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX942EUA+ Overview


The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, TTL output is used here.Electronic comparator is shipped by Tube .The comparator has 8 terminals.Electronic comparator is a component of the Comparators family.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as General Purpose .The total number of elements is 2 .The device is equipped with 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 8 .You can search MAX942 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 600μA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 500μA in order to use the device normally.A current supply greater than 500μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum of 150nA current into the device.In order to operate normally, a supply voltage of 0 is required.

MAX942EUA+ Features


CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 600μA

MAX942EUA+ Applications


There are a lot of Maxim Integrated MAX942EUA+ linear comparators applications.

  • Multivibrators and High-Voltage Digital Logic Gates
  • Infotainment & cluster
  • Notebooks and PDAs
  • DC/DC and AC/DC power supplies
  • Alarm and Monitoring Circuits
  • Hand-Held Electronics
  • Portable and Battery-Powered Systems
  • Handheld Instruments
  • Lithium ion battery monitoring
  • Power management

Write a review

Note: HTML is not translated!
    Bad           Good