MAX942EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX942 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 500μA |
| Max Supply Current | 500μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 600μA |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 6.5V |
| Input Bias Current | 150nA |
| Current - Quiescent (Max) | 600μA |
| Voltage - Input Offset (Max) | 3mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX942EUA+T Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.The comparator has a type CMOS, Push-Pull, TTL output.The chip is packaged with Tape & Reel (TR) .8 terminals are found on the comparator.Electronic comparator is a component of the Comparators family.With a voltage of 3V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .In total, it contains 2 elements.There are 8 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator consists of 8 pins.If you require more pin-to-pin solutions, search MAX942 for more options.A quiescent current of 600μA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 500μA in order to use the device normally.The compartator could be damaged if the current supply exceeds 500μA .A power supply of 3/5V is sufficient for the operation of the device.
MAX942EUA+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 600μA
MAX942EUA+T Applications
There are a lot of Maxim Integrated MAX942EUA+T linear comparators applications.
- Mobile Phones and Tablets
- Factory automation & control
- Security Detection Systems
- Hand-Held Electronics
- Mobile Phones
- Metering Systems
- Power Supervision
- Building automation
- Point of load regulators
- Set Top Boxes
